CV Axle Replacement
Shop Cost
~$500
DIY Parts
~$80
You Save
~$420
Tools needed (one-time, if you don't own them)~$220
🔧 Torque Spec: Axle nut: 150-200 ft-lbs
Tools Required (7)
Jack & jack stands
Socket set (30-36mm)
Breaker bar
Pry bar
Rubber mallet
Torque wrench
Pliers
Parts & Consumables
CV axle assemblyAxle nut
Pro Tip Buy complete assemblies. Axle nut is one-time-use.
🚗 Vehicle-Specific Notes
Honda
32mm axle nut. Pry inner joint from transaxle with large pry bar. New circlip included.
Toyota
30mm axle nut. RAV4/Camry straightforward. Snap ring on inner joint.
Subaru
All AWD. 32mm axle nut. Roll pin holds inner stub. Both sides accessible.
Extra tools: Roll pin punch
Ford
Escape/Focus: 32mm axle nut. Twist motion helps pop inner joint free.
Volkswagen
Triple-square (12-point) bolts on inner flange. Buy correct bit set.
Extra tools: Triple-square bit set (M8, M10)
❓ Common Questions
What tools do I need for a cv axle replacement?
You need 7 tools: Jack & jack stands, Socket set (30-36mm), Breaker bar, Pry bar, Rubber mallet, Torque wrench, Pliers. Parts required: CV axle assembly, Axle nut.
How much does a cv axle replacement cost DIY vs shop?
A shop charges approximately $500. Doing it yourself costs about $80 in parts, saving you $420.
How hard is a cv axle replacement to do yourself?
Rated Advanced (4/5 difficulty). Typically takes 2-3 hrs. Buy complete assemblies. Axle nut is one-time-use.
📧
Get DIY tips & tool deals
Join DIYers saving money on cv axle replacement and 76+ other repairs. No spam, unsubscribe anytime.