Blower Resistor
Shop Cost
~$120
DIY Parts
~$15
You Save
~$105
Tools needed (one-time, if you don't own them)~$65
Tools Required (2)
Socket set
Screwdriver
Parts & Consumables
Blower motor resistor
Pro Tip Fan works only on high = resistor. Usually 2 screws under passenger dash.
🚗 Vehicle-Specific Notes
Honda
Next to blower motor under passenger dash. 2 screws. Common failure — burns out.
Toyota
Adjacent to blower motor. 2 screws. Connector with 4-5 wires.
Ford
Near blower motor. 2 screws. If connector is melted, replace pigtail too.
Extra tools: Replacement pigtail connector
BMW
Called 'final stage resistor.' Different part number than standard resistor. Check model.
Chevrolet
Near blower motor. 2 screws. Check connector for heat damage.
❓ Common Questions
What tools do I need for a blower resistor?
You need 2 tools: Socket set, Screwdriver. Parts required: Blower motor resistor.
How much does a blower resistor cost DIY vs shop?
A shop charges approximately $120. Doing it yourself costs about $15 in parts, saving you $105.
How hard is a blower resistor to do yourself?
Rated Beginner (1/5 difficulty). Typically takes 15-30 min. Fan works only on high = resistor. Usually 2 screws under passenger dash.
📧
Get DIY tips & tool deals
Join DIYers saving money on blower resistor and 76+ other repairs. No spam, unsubscribe anytime.